|
The Saxon Class XV T was a class of goods train steam locomotive operated by the Royal Saxon State Railways, which had been conceived for hauling trains and acting as banking engines for routes in the Ore Mountains. In 1925 the Deutsche Reichsbahn grouped them into their DRG Class 79.0. == History == The two locomotives were built in 1916 at the Sächsischen Maschinenfabrik, formerly Hartmann. The undercarriage of the locomotives was unusual. Instead of an alternative proposal for a twelve-coupled locomotive with sideways-sliding Gölsdorf axles, as was realised a year later in the shape of the Württemberg K, the Saxon Railways decided on a proposal by their head of the engineering department, Lindner, for a design that was unique in Germany: the Saxon XV HTV was given two, fixed, six-coupled drives. This was mainly because they had doubts about the suitability of the ''Gölsdorf'' system for twelve-couplers. The outside axles were designed as Klien-Lindner axles and could be slid sideways by about 37 mm from their centre position. The design of these axles required them to be fixed into an outside frame. In the centre of the locomotive was a double cylinder each with a high-pressure cylinder for the rear and a low-pressure cylinder for the front drive. This design with its low stress on the rails, low inherent resistance and simple weight compensation was promising especially as it also avoided the use of cranked driving axles. Similar thoughts in the USA during the 1930s led to the development of duplex locomotives. Because the cylinders of adjacent axles also had 28 mm of side play, the locomotive could negotiate radii of as little as 170 m. Through the special design of the cylinders the use of crank axles (''Kropfachse''). Whilst this design enabled the steam lines between the high- and low-pressure cylinders to be extremely short, long admission and exhaust tubes were necessary. The XV HTV soon proved to be expensive to maintain, particularly with regard to the drives and the hollow axles; as a result no more were procured. Even the usual tendency of all compound engines to sway could not be eliminated by the Klien-Lindner configuration. Wear and tear on the wheel tyres changed the crank settings of the driving gear. That meant that the synchronisation of the drive had to be constantly adjusted, in order to ensure a balanced distribution of effort. Nevertheless, the engines were successful in practice. They had impressive riding qualities right up to their top speed and wear and tear on the wheel flanges was low. The Deutsche Reichsbahn took both locomotives over as 79 001 and 79 002, but retired them by 1932. The serial number 79 001 was allocated from 1938 to 1947 to BLE No. 44 of the former Brunswick State Railway Company and from 1951 it was given to the former French locomotive, 242 TA - 602, which ended up in German hands after World War II. 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「Saxon XV HTV」の詳細全文を読む スポンサード リンク
|